25. To make the tail, fold down the center of the strip of paper to form a trough.
... continued from steps 13 to 24
25. To make the tail,
fold down the center of the strip of paper to form a trough.
26. Tear as shown to form control surfaces. The folds should be parallel with the bottom of the trough.
27. Fold wings up.
28. Fold the right
wing down as shown in photos 28 and 29. Take special care to
angle this fold in such a way so that the leading edge of the wing is
slightly higher than the trailing edge.
29. Study this photo and you will see that the fold is not exactly parallel with the trough at the bottom but slightly angled as described in photo 28.
30. The plane should look like this at this point.
31. Bend the wingtips
up.
32. Insert tail into slot under wing.
33. Finished at last!
34. Aircraft shown with
landing gears down. Note: the craft does not fly as well with the
gears down.
35. Ready to fly! - IMPORTANT: For instructions on how to fly the model airplane, go to How to fly it.
Model airplane instructions steps: | 1
to 12 | 13 to
24 | 25 to 35 |
| Home page - Best
paper airplane in the world | How
to fly it | Top of
page |
All contents copyright © 2000,
Conceptos Digitales C.R., S.A. All rights reserved.
URL: http://www.zurqui.com/ Revised: Dec. 31,
2004